Top Publication

International Scientific Indexing (ISI)

 

1- A. Bahrami, S.­H. Mousavi Anijdan, H.R. Maddah Hosseini, A. Shafyie and R. Narimani, "Effective parameters modeling in compression of an austenitic stainless steel using artificial neural network", Journal of Computational Materials Science, Vol. 34, Issue 4, Dec. 2005, PP. 335-341.

 

2-S.H. Mousavi Anijdan, A. Bahrami, H.R. Maddah Hosseini and A. Shafyie, "Using genetic algorithm and artificial neural network analyses to design an Al- Si casting alloy of minimum porosity", Journal of Materials & Design, Vol.  27, Issue 7, 2005, PP. 605-609.

 

3- A. Shafyei, S.H. Mousavi Anijdan , A. Bahrami, "Prediction of porosity percent in Al–Si casting alloys using ANN", Journal of Materials Science and Engineering: A, Volume 431, Issues 1-2,15 Sep. 2006, PP. 206-210.

 

4- G. Dini, M. MonirVaghefi and A. Shafyei, "The Influence of Reheating Temperature and Direct-cooling Rate after Forging on Microstructure and Mechanical Properties of V-micro-alloyed steel 38MnSiVS5", ISIJ International, Vol. 46, 2006, No. 1, PP. 89-92.

 

5- A. Maleki, B. Niroumand and A. Shafyei, "Effects of squeeze casting parameters on density, macrostructure and hardness of LM13 alloy", Journal of Materials Science and Engineering: A, Volume 428, issues1-2, 25 July 2006, PP. 135-140.

 

6- R.  Emadi, A. Monshi, A. Shafyei, "Using a Novel Technique to Shape a Refractory Castable by Cold Isostatic Pressing and a Study of the Effect of Pressure on the Hydration Reaction of High-alumina Cement", Journal of Metals and Materials International, 2007, Vol. 13; Part1, PP. 1-12.

 

7- O. Mirzaee, M.A. Golozar, A. Shafyei, "Influence of V2O5 as an effective dopant on the microstructure development and magnetic properties of Ni0.64Zn0.36Fe2O4 soft ferrites", Journal of Materials Characterization, Vol. 59, Issue 5, May 2008, PP. 638-641.

8- O. Mirzaee, A. Shafyei, M.A. Golozar, H. Shokrollahi," Influence of MoO3 and V2O5 co-doping on the magnetic properties and microstructure of a Ni–Zn ferrite", Journal of Alloys and Compounds, Volume 461, Issues 1–2, 11 August 2008, PP. 312-315.

 

9- M. Alizadeh, H. Edris, A. Shafyei, "Fluid flow and mixing in non-isothermal water model of continuous casting tundish", Journal of Iron and Steel Research International, Volume 15, Issue 2, March 2008, PP. 7-13.

 

10. M. Alizadeh, H. Edris and A. Shafyei, "Fluid Flow and Mixing in Nonisothermal Water Model of Continuous Casting Tundish", Journal of Iron and Steel Research International,Vol 15, Issue 2, March 2008, PP.7-22. 

 

11- A. Bapari, A. Najafizadeh, M. Moazeny, A. Shafyei ,  "Simulation of radial forging conditions by third hits hot compression tests", Materials Science and Engineering: A, Volume 491, Issues 1-2, September 2008, PP. 258-265.

 

12- A. Maleki, A. Shafyei, B. Niroumand, "Effects of squeeze casting parameters on the microstructure of LM13 alloy", Journal of Materials Processing Technology, Volume 209, Issue 8, 21 April 2009,PP. 3790-3797.

 

13- A. Akhbarizadeh, A. Shafyei, M.A. Golozar, "Effects of cryogenic treatment on wear behavior ofD6 tool steel" ,Materials & Design, Volume 30, Issue 8, September 2009, PP. 3259-3264.

 

14- M. Mirjani, A. Shafyei, F. Ashrafizadeh, "Plasma and gaseous nitrocarburizing of C60W steel for tribological applications", Vacuum, Volume 83, Issue 7, March 2009, PP. 1043-1048.

 

15- T. DalalliIsfahani, A. Shafyei, H. Sharifi, "Impact and tensile properties of ferrite- martensite dual- phase steels", Fatigue & Fracture of Engineering Materials & Structures, Volume 32, No. 2, February 2009, PP. 141-147.

 

16- M. Delshad Chermahini, S. Sharafi, H. Shokrollahi, M. Zandrahimi, A. Shafyei, "The Evolution of Heating Rate on the Microstructural and Magnetic properties of milled Nanostructural Fe1-xCox (x= 0.2, 0.3, 0.4, 0.5 and 0.7) powders", Journal of alloys and Compounds, 484, 2009, PP. 54-58.

 

17- A. Akhbarizadeh, M.A. Golozar, A. Shafyie, M. Kholghy,"Effects of Austenizing Time on Wear Behavior of D6 Tool Steel After Deep Cryogenic Treatment", Journal of Iron and Steel Research, International, Volume 16, Issue 6, November 2009, pp.  29-32.

18- F. Tavangarian, R. Emadi, A. Shafyei," Influence of mechanical activation and thermal treatment time on nanoparticle forsterite formation mechanism", Powder Technology, Volume 198, Issue 3, 25 March 2010, pp. 412-416.

19- K. Amini, S. Nategh, A. Shafyei," Influence of different cryotreatments on tribological behavior of 80CrMo12 5 cold work tool steel", Materials & Design, Volume 31, Issue 10, December 2010, pp. 4666-4675.

 

20- F. Foroozmehr, A. Najafizadeh, A. Shafyei, "Effects of carbon content on the formation of nano/ultrafine grained low-carbon steel treated by martensite process", Materials Science and Engineering: A, Volume 528, Issue 18, 15 July 2011, pp. 5754-5758.

 

21- A. Shabani, M. R.Toroghinejad, A. Shafyei, "Effect of post-rolling annealing treatment and thickness of nickel coating on the bond strength of Al–Cu strips in cold roll bonding process", Materials & Design, Volume 40, September 2012,  pp.  212-220.

22- H. Salimi , M. Hosseini , J. Mostaghimi , H. Samadi , A. Shafyei, "Thomas w coyle , larry pershin , " Plasma sprayed coating using mullite and mixed alumina/silica powders " , Journal of Thermal Spray Technology , Volume 21 , Sep 2012 , PP. 825-830.

 

23- A. Shabani, M. R. Toroghinejad, A. Shafyei, "Fabrication of Al/Ni/Cu composite by accumulative roll bonding and electroplating processes and investigation of its microstructure and mechanical properties", Materials Science and Engineering: A, Volume 558, 15 December 2012, PP. 386-393.

 

24- - M. Zabihi, M. R. Toroghinejad, A. Shafyei," Application of powder metallurgy and hot rolling processes for manufacturing aluminum/alumina composite strips", Materials Science and Engineering: A, Volume 560, 10 January 2013, PP.  567-574.

 

25- S. Shahabi , A. Shafyei, M. Golozar , " Evaluation of heat treatments and their effects on the corrosion behavior of TiAlON coatings prepared by cathodic arc evaporation on D3 tool steel" , International Journal of Iron and Steel Society of Iran (Int.J.of ISSI) , Volume 10 , 2013 , PP. 1-6.

 

26- M. Zabihi, M. R. Toroghinejad, A. Shafyei, "Evaluating the mechanical behavior of hot rolled Al/alumina composite strips using shear punch test", Materials Science and Engineering: A, Volume 618, 17 November 2014, PP. 490-495.

 

27- S. Hassani, M. Shamanian, A. Shafyei, P. Behjati, J.A. Szpunar, "Non-isothermal kinetic analysis on the phase transformations of Fe–Co–V alloy", Thermochimica Acta, Volume 596, 20 November 2014, PP. 89-97.

 

28 – K. Amini , M. Hoda , A. Shafyei, " Investigation of the Effect of Heat Treatment on the Mechanical Properties and Microstructure of DIN 4057/1 Martensitic Stainless Steel" , Metal Science and Heat Treatment, Volume 55 , Jan 2014 , PP. 499-503.

 

29- S. Hassani, M. Shamanian, A. Shafyei, P. Behjati, J.A. Szpunar, M. Fathi-Moghaddam," Nano/sub-micron crystallization of Fe–Co–7.15V alloy by thermo-mechanical process to improve magnetic properties", Materials Science and Engineering: B, Volume 190, December 2014, PP. 96-103.

 

30- M. Akbarzadeh , A. Shafyei, H. Salimi , " Characterization of TiN CrN and (Ti Cr)N coatings deposited by cathodic arc evaporation " , International Journal of Engineering- Transation b , volume 27 , jan 2014 , PP. 1127-1132.

 

31- M. Golzarshahri, A. Shafyei, A. Saidi, K. Abtahi," Formation of β-zirconia and γ-zirconia nano-particles from α-zirconia by mechanical activation", Ceramics International, Volume 40, Issue 8, Part B, September 2014, PP.  13217-13221.

 

32- M. shirinbayan, A. Shafyei, M. Abutalebi , " kinetics of Vanadium Carbide Coating Produced on AISI D2 Steel by Thermoreactive Diffusion Technique" ,  Russian Journal of Applied Chemistry, Volume 87 , 2014 , PP. 1927-1932.

 

33- Ali Ghaheri, Ali. Shafyei, M. Honarmand, "Effects of inter-critical temperatures on martensite morphology, volume fraction and mechanical properties of dual-phase steels obtained from direct and continuous annealing cycles", Materials & Design, Volume 62, October 2014, PP. 305-319.

 

34- M. Sadeghian, M. Shamanian, A. Shafyei, "Effect of heat input on microstructure and mechanical properties of dissimilar joints between super duplex stainless steel and high strength low alloy steel", Materials & Design, Volume 60, August 2014, PP. 678-684.

 

35-  S. Hasani, M. Shamanian, A. Shafyei, P. Behjati, H. Mostaan, P. Sahu, J.A. Szpunar, "Electron microscopy study on grain boundary characterizations of Fe–Co–V alloy during annealing", Vacuum, Volume 114, April 2015, PP. 1-5.

 

36-­S. Hassani, M. Shamanian, A. Shafyei, P. Behjati, M. Nezakat, M. Fathi-Moghaddam, J.A Szpunar," Influence of annealing treatment on micro/macro-texture and texture dependent magnetic properties in cold rolled FeCo–7.15V alloy", Journal of Magnetism and Magnetic Materials, Volume 378, 15 March 2015, PP. 253-260.

 

37- M. Hadi, M. Meratian, A. Shafyei," The effect of lanthanum on the microstructure and high temperature mechanical properties of a beta-solidifying TiAl alloy", Journal of Alloys and Compounds, Volume 618, 5 January 2015, PP. 27-32.

 

38- M. Hadi, A. Shafyei, M. Meratian, "A comparative study of microstructure and high temperature mechanical properties of a β-stabilized TiAl alloy modified by lanthanum and erbium", Materials Science and Engineering: A, Volume 624, 29 January 2015, PP. 1-8.

 

39- S. Hassani , A. Shafyei, M. Shamaaneian , P. Behjati , H. Mostaan , Timu juuti , Szpunar jerzya , " Correlation Between Magnetic Properties and Allotropic Phase Transition of Fe Co V Alloy " , Acta Metallurgica Sinica-English Letters , Volume 1, July 2015 , PP. 1-4.

 

40- M. Golozar, A. Shafyei, A. Saaeidi , K. Abtahi , " Effect of CaO on the Formation of PSZ and Gamma-Zirconia Nanoparticles through Ball Milling " , Advanced Ceramics Progress , Volume 2, 2015, PP.40-44

 

41- M. Zabihi, M. R. Toroghinejad, A. Shafyei, "Shear punch test in Al/Alumina composite strips produced by powder metallurgy and accumulative roll bonding" , Materials Science and Engineering: A, Volume 667, 14 June 2016, PP. 383-390.

42- M. Mosalanezhad , A. Shafyei, S. Akhavan , " Simultaneous co-deposition of SiC and CNT into the Ni coating" , canadian metallurgical quarterly", Volume 55 , Feb 2016 , PP. 147-155.

43- H. Babaee, K. Amini , A. Shafyei, " The effect of heat treatment on mechanical properties and microstructure of the AISI 422 martensitic stainless steel", Mechanika , Volume 22 , 2016, PP.576-580.

 

44- A. Shabani , M. Toroghinezhad , A. Shafyei, " Investigating the formation of intermetallic compounds and the variation of bond strength between Al-Cu layers after annealing in presence of nickel coating on copper" , Iranian Journal of Materials Science and Engineering, Volume 13 , Jan 2016 , PP. 35-43.

 

45- M. Jafari , M. Asadi , R. Tafrishi , A. Shafyei, " Evolution of Nanostructure in Al 1050 Sheet Deformed by Cryo-cross-rolling, journal of materials engineering and performance , Volume 25 , Apr 2016 , PP. 1643-1649.

 

46- S. Hassani , A. Shafyei, M. Shamaaneian , M. Nezakat , H. Mostaan, Szpunar jerzy , "Effect of recrystallization and phase transitions on the mechanical properties of semi-hard magnetic FeCo-15/7V alloy during thermomechanical process" , Metallurgical and Materials Transactions A-physical Metallurgy and Materials Science, volume 48 , 2017 , PP. 1903- 1909.

 

47- N. Habibpour , A. Shafyei, R. Amini , A. Meysami , " Effects of post-weld heat treatment temperature on the microstructure and mechanical properties of welded A517-Gr.B steel by SMAW method " , Metallurgical Research and Technology, Volume 114 , April 2017 , PP. 1-6.

 

48 – H. Abedi Madiseh, M. Salehi, A. Shafyei," Microstructure Tensile Adhesion Strength and Thermal Shock Resistance of TBCs with Different Flame-Sprayed Bond Coat Materials onto BMI Polyimide Matrix Composite", Journal of Thermal Spray Technology, volume 26, Aug 2017 , PP. 1669-1684.

 

49- H. R. Abedi, M. Salehi, A. Shafyei, "Mechanical and thermal properties of double-layer and triple-layer thermal barrier coatings with different ceramic top coats onto polyimide matrix composite", Ceramics International, Volume 43, Issue 15, 15 October 2017, PP. 12770-12780.

 

50-S. Hassani, A. Shafyei, M. Nezakat, H. Mostaan, P. Sahu, "The effect of the order-disorder transition on the electrical", Magnetic and Mechanical Properties of Vicalloy I, Intermetallics, Volume 81, February 2017, PP. 73-79.

 

51- M. Moshref-javadi, H. Edris, A. Shafyei, H. Salimi-Jazi, "Diffusion behavior of hydrogen through thermally sprayed coating of 316L stainless steel", International Journal of Hydrogen Energy, Volume 42, Issue 9, 2 March 2017, PP. 6409-6419.

 

52-­M. Moshref-Javadi, H. Edris, A. Shafyei, H. Salimi-Jazi, E. Abdolvand," Evaluation of hydrogen permeation through standalone thermally sprayed coatings of AISI 316L stainless steel", International Journal of Hydrogen Energy, Volume 43, Issue 9, 1 March 2018, PP. 4657-4670.

 

53- A. Shabani, M. R. Toroghinejad, A. Shafyei, "Pasquale Cavaliere, Effect of cold-rolling on microstructure, texture and mechanical properties of an equiatomic FeCrCuMnNi high entropy alloy", Materialia, Volume 1, September 2018, PP. 175-184.

 

54- A. Nazari, A. Shafyei, A. Saidi, "Recycling of electric arc furnace dust into glass-ceramic, Materials Chemistry and Physics", Volume 205, 1 February 2018, PP. 436-441.

 

55-   H. R. Abedi, M. Salehi, A. Shafyei," Multi-layered thermal barrier coatings on BMI polyimide matrix composite", Surface and Coatings Technology, Volume 337, 15 March 2018, PP. 104-116.

 

56- H. R. Abedi, M. Salehi, A. Shafyei, "Microstructural, mechanical and thermal shock properties of triple-layer TBCs with different thicknesses of bond coat and ceramic top coat deposited onto polyimide matrix composite", Ceramics International, Volume 44, Issue 6, 15 April 2018, PP. 6212-6222.

 

57- M.  Hadi , O. Bayat , M. Merateyan , A.Shafyei, E. Ebrahimzadeh , " Oxidation Properties of a Beta-Stabilized TiAl Alloy Modified by Rare Earth Elements " , oxidation of  metals, Mar 2018 .

 

58- M. Jafari Eskandari, A. Shafyei, S. Razi, R. Shoja Razavi, "Influence of gold nanolayer coating on the continuous-wave laser ablation of a pure aluminum surface" Evaluations of Structural and Optical Features, Thin Solid Films, Volume 672, 28 February 2019, PP. 126-132.

 

59- A. Shabani, M. R. Toroghinejad, A. Shafyei, Roland E. Logé, "Evaluation of the mechanical properties of the heat treated FeCrCuMnNi high entropy alloy", Materials Chemistry and Physics, Volume 221, 1 January 2019, PP. 68-77.

 

60- ­Ali Obeydavi, Ahmad Rezaeian, Ali Shafyei, Parviz Kameli and Jyh-Wei Lee, "Prediction of amorphous phase formation by thermodynamic and kinetic analysis, a Fe-based thin film metallic glass deposited by direct current magnetron sputtering ", Materials Research Express, Volume 6, Number 9.

 

61- Mohammad Jafari Eskandari, Ali Shafyei, Fathallah Karimzadeh, "One-step fabrication of Au@Al2O3 core-shell nanoparticles by continuous wave fiber laser ablation of thin gold layer on aluminum surface: Structural and optical properties" Optics and Laser Technology, volume 126, June 2020, 106066.

 

62-M Salmaniyan. M. Shamanian. A. Shafyei "Multicomponent Diffusion studies in selected high temperature for IN718/BNi-2/316L Diffusion Couple, Transaction of the Indian institute of metals cite this article metrics, may 2020, PP 1319-1331.

 

63-Mohammadreza Afsous, Ali. Shafyei, Masoud Soltani,­ Ali Eskandari,"Characterization and evaluation of tribological properties of NiCrBsi-Gr composite coatings deposited on stainless steel 420 by HVOF, Journal of thermal spray technology, Volume 29, Feb 2020, PP 773-788.

 

64-Ali Obeidavi, Ali Shafyei, Ahmad Rezaeian, Parviz Kameli, Jyh-Wei Lee," Microstructure mechanical properties and corrosion performance of Fe44Cr15Mo14CoVC10B5Si5 thin film metallic glass deposited by DC magnetron sputtering", Journal of Non-Crystalline Solids Volume 527, 1 January 2020, 119718, PP. 1-17.

 

65--Ali Obeidavi, Ali Shafyei, Ahmad Rezaeian, Parviz Kameli, Jyh-Wei Le, Fabrication and properties evaluation of novel Fe_46-XCr₂₃Mo₁₄Co₇P_XB₅Si₅ (X=0.6) m metallic glasses deposited by DC magnetron sputtering, Intermetallics, Volume 131, April 2021, 107120.

 

66- Mohammad Jafari Eskandari, Ali Shafyei, Fathallah Karimzadeh, Investigation of wetting properties of gold nanolayer coated aluminum surfaces textured with continuous-wave fiber laser ablation, Thin Solid Films, Volume 711, 1 October 2020, 138278.

 

67- A. Basiri , A.H. Nassajpour , M. R. Haftbaradaran,  A. Alhaji , Ali Shafyei, Optimization of spray freeze drying parameters for spark plasma sintering of transparent MgAl₂O₄ spinel, Ceramics International, Volume 48, Issue 8, 15 April 2022, PP. 10751-1076.

 

68- Zahra Ameri, Esmaiel Soleimani, Ali Shafyei, Preparation and identification of a biocompatible polymer composite: Shielding against the interference of electromagnetic waves, Synthetic Metals, Volume 283, January–February 2022, 116983.

 

Islamic World Science Citation Center - ISC

 

1- M. Alizadeh, H. Edris, A. Shafyei, "Mathematical Modeling of Heat Transfer for Steel Continuous Casting Proeess", International Journal of Iron and steelsociety of Iran (ISSI), Vol. 3, No. 2, 2006, P 7.

 

2- A. Mahdavian, A. Shafyei, E. Keshavarz-Alamdari, D.F. Haghshenas,  Recovery of Vanadium from Esfahan Steel Company Steel Stag; "Optimizing of Roasting and Leaching Parameters", International Journal of Iron and Steel Society of Iran (ISSI), Vol. 3, No. 2, 2006, P.17.

 

3- K. Amini, S. Nategh, A. Shafyei, A. Rezaeiyan, " The effect of deep cryogenic treatment on mechanical properties of 80CrMo125 tool steel ", International Journal of Iron and Steel Society of Iran (Int.J.of ISSI) , Volume 7 , 2010 , PP 12-17.

 

4- A. SHerkat, M. Monirvaghefi, A.Shafyei, " Fabrication and synthesis of electroless nickel-phosphorus coatings reinforced by incorporated chromium carbide-nickel-chromium particles " , Revue de Metallurgie-Cahiers Dinformations Techniques , volume 108 , Sep. 2011 , PP. 95-99.

 

5- K. Amini , S. Nategh , A. Shafyei, A. Rezaeiyan, " Effect of deep cryogenic treatment on the properties of 80CrMo125 tool steel ", International Journal of Minerals Metallurgy and Materials, Volume 19 , jan 2012 , PP. 30-37.

 

6- M. akbarzadeh, A. Shafyei, H. Salimi, " Ti-Cr-N Coatings Deposited by Physical Vapor Deposition on AISI D6 Tool Steels", International Journal of Iron and Steel Society of Iran (Int. J. of ISSI), Volume 9, 2012, PP. 32-38.

 

7- S. Nazari, A. Saaedi , A. Shafyei," production of Fe-TiN and Fe-Ti(N C) composite powder by mechanical alloying, Journal of Advanced Materials and Processing, volume 1, 2012, PP. 9-15.

 

8- M. Aghakhani, A. Shafyei, H. Monajatizadeh, M.A. Aghakhani, " Effect of Deposition Regime on Tribological Behavior of VK8 Coating on 2344/1 Tool Steel Obtained by Electro Spark Method ", Journal of Advanced Materials and Processing, volume 2, 2012 , PP. 21-27.

 

9- V. Hasanbeigi, A. Shafyei," Investigation on Microstructure and Grain Refining Performance of a New Type of Al-3Ti-C Master Alloy ", Open Journal of Metals, Volume 4, Sep. 2014, PP. 49-55.

 

10 - M. Akbarzadeh, A. Shafyei, H. Salimijazi , "Comparison of the CrN, TiN and (Ti-Cr)N PVD Coatings Deposited by Cathodic ARC Evaporations", Iranan Journal of Materials Science and Engineering, Volume 12 , March 2015 , PP. 43-51.

 

11-S. Ghasemi, A. Shafyei, " Production and Crystallization Behavior of an Iron Rich Glass Ceramic Prepared by Ironmaking and Steelmaking Wastes ", International Journal of Iron and Steel Society of Iran, (Int. J. of ISSI) , Volume 14, 2017 , PP. 17-22.

 

12- S. Ghasemi, A. Shafyei, "Kinetics of Ceramic Phase Crystallization in a Glass Derived from Wastes of Iron and Steel Industry", International Journal of Iron and Steel Society of Iran, (Int. J. of ISSI), Volume 16, 2019, No. 2, PP. 21-28.

 

International conferences

 

1- Shafyei A. and Guthrie R.I.L., “Dissolution Mechanism of Compact Briquettes of High Melting Point Additives in Stirred Molten Aluminum”, Light Metals 95, 124th TMS annual Meeting, Las Vegas, USA, Feb. 12- 16, 1995, pp. 831- 839.

 

2- Shafyei A. and Guthrie R.I.L. “Alloying of liquid Aluminum”, Light Metals 96, 125th TM Annual Meeting, Los Angeles, USA, 1996, pp. 1017 -1026.

 

3-Rezaeian A., Najafi-Zadeh A. and Shafyei A., “Thermomechanical and Grain Growth Behavior of DIN-17102 Steel”, HSLA Steel ‘2000, The 4th International Conference on High Strength Low Alloy Steels, Oct.30 – Nov.2, 2000, Xi’an, China, pp. 203-210.

 

4- Mirjani M., Ashrafizadeh F. and Shafyei A., “Plasma and Gaseous Nitrocarburizing of C60W Steel for Tribological Applications”, Transaction of Materials and Heat Treatment, 2004.

 

5-Lavvafi H., Khorsand H., Shafyei A. and Nazemi F., “The Effect of Boron Content on the Sintering and Mechanical Properties of Sintered Steel”, 4th International Congress on Powder Metallurgy for Automotive Parts, Isfahan-Iran, April 17-21, 2005, pp.78-83.

 

6- Mirjani M., Shafyei A., AshrafizadehF, MonirVaghefiM., "Plasma and Gaseous Nitrocarburizing of 1.6523 Steel for Tribological Applications", Proceedings of the 15^th IFHTSE, 2006.

 

7- Jafarpishe S., Dehghanian C., Emamy M., Shafyei A., " Effect of Calcium Addition and Heat Treatment on the Al-Zn-In Alloys as Sacrificial Anode", Proceedings of ICOMAST 2006, 2006.

 

8- Jafarpishe S., Emamy M., Dehghanian C., Shafyei A., " Effect of Lithium Addition and Heat treatment on the Al-Zn-In Alloys as Sacrificial Anode", EUROCORR 2006, 2006.

 

9- Alizadeh A., Edris H., Shafyei A., " Numerical Solution of Heat Transfer and Solidification for Continuous Steel Slab Casting at the Mobarakeh Steel Company", Proceedings of the 5^th Decennial International Conference on Solidification Processing, Sheffield, July 2007, PP. 502.

 

10- Rahaei M. B., Sadrnezhaad S. K., Ebadzadeh T., Shafyei A., Kholghi M., Keshavarz E., Rahimipour M. and Rahaei M., "Evaluating TribologicalBehavior of Ti₃SiC₂ Ternary Compound for Use as Solid Lubricant", 16^th Annual (International) Conference on Mechanical Engineering ISME2008, Shahid Bahonar University of Kerman, Iran, May 13-15, 2008, pp. 481-482.

 

11- Rahaei M. B., Kholghi M., Shafyei A., "Primary Evaluation of Fabrication of Mechanical Seal Rings by Combustion Synthesis Process", 15^th ISC, Stuttgart, Germany, October 7-8, 2008, pp. 229-238.

 

12-Mehran Salmanian, Morteza Shamaanian, Ali Shafyei, " ­Multicomponent Diffusion studies in selected high Temperature for In718/BNi-2316L Diffusion couple", India, May 2020- pp 1319-1331.